Updated Nov 21, 2026· 8 min read

Key takeaways

  • Compare the best timing chain kits for Ford, GM and Honda engines, with chains, guides, tensioners, sprockets and VVT parts covered in one box.

Disclosure: As an Amazon Associate, I earn from qualifying purchases.

Our top pick: Cloyes 9-0387SHX Timing Chain Kit. Runner-up: Dorman 966-101XD Timing Kit with VVT Camshaft Phasers.

A timing chain rarely fails all at once. It stretches a little at a time, the hydraulic tensioner runs out of travel, the plastic guides wear grooves and crack, and one cold morning the engine rattles for a few seconds before the oil pressure builds. Leave it long enough and the chain can jump a tooth, which on an interference engine means pistons meeting valves. That is why experienced technicians almost never replace a chain by itself. A timing chain kit bundles the chain with the guides, tensioners, and sprockets that wear alongside it, so the whole system starts fresh instead of the new chain being chewed up by old parts.

The five kits below cover some of the most common chain-driven engines on the road: Ford’s modular V8 and 4.0L SOHC V6, the Ford 5.4L three-valve with its troublesome cam phasers, GM’s High Feature 3.6L V6, and Honda’s K24 four-cylinder. Every kit is application-specific, so match the part number to your exact engine before ordering.

How to Choose

Start with completeness. A proper kit includes the chain or chains, both fixed and tensioner-side guides, the tensioner itself, and the crank and cam sprockets. On engines with variable valve timing, decide up front whether the cam phasers (VVT sprockets) are included or must be bought separately, because worn phasers are often the real source of the noise. Kits that add the water pump or oil pump make sense when those parts are driven inside the timing cover and are due anyway.

Next, confirm fitment by engine code and model year, not just by vehicle name. Several engines in this roundup were built in more than one version, and a kit for one version will not time the other correctly. Cross-check the kit’s listed OE part numbers against the numbers for your vehicle.

Finally, think about what else the job needs. Most of these engines use torque-to-yield phaser or sprocket bolts that must be replaced, not reused. Plan on fresh oil and a filter afterward, since the tensioners depend on clean oil pressure, and budget for timing cover gaskets and a front crank seal if the kit does not include them.

The Kits

Cloyes 9-0387SHX Timing Chain Kit

Specs

  • Manufacturer part number: 9-0387SHX
  • Application family: Ford modular V8 engines (4.6L, 5.4L, and 6.8L applications)
  • Item weight: 5.55 pounds
  • Package dimensions: 6.2 x 12.2 x 2.8 inches
  • Kit format: timing chain and sprockets from a dedicated timing-drive manufacturer

Cloyes has built timing drive systems since 1921, and its kits are the default choice in many professional shops. The 9-0387SHX belongs to the kit family Cloyes lists for Ford’s modular V8 line, the engines that powered years of F-150s, Mustangs, Crown Victorias, and E-Series vans. Cloyes stresses and heat-treats its chains and machines its sprockets with controlled tooth profiles, which matters on an engine where a sloppy chain-to-sprocket fit shows up as timing scatter and noise. Confirm the exact sub-application for your year and engine in the fitment data before ordering, and pair the kit with new guides and tensioners if your specific box contents do not include them.

Dorman 966-101XD Timing Kit with VVT Camshaft Phasers

Specs

  • Manufacturer part number: 966-101XD
  • Engine: Ford 5.4L 3V V8 (24-valve Triton)
  • Includes: pair of upgraded OE FIX camshaft phasers, timing chains, guides, tensioners, and crank sprocket
  • Cross reference: Ford 3R2Z-6A257-DA; Cloyes 9-0391SBVVT
  • Example fitment: Ford F-150 2005-2010, Expedition 2004-2014, F-250/F-350 Super Duty 2005-2010, Lincoln Navigator 2005-2014

The 5.4L three-valve Triton is famous for cam phaser knock, and Dorman built this kit around that exact failure. The original phasers commonly fail from internal leaks, so the 966-101XD includes a pair of redesigned OE FIX phasers alongside the chains, guides, tensioners, and sprocket, turning a multi-part hunt into one box. It is the most complete answer here for a high-mileage 5.4L 3V that rattles at idle. Remember that the phaser bolts on this engine are torque-to-yield and must be replaced and torqued exactly to the factory procedure.

Melling 3-398S Timing Kit

Specs

  • Manufacturer part number: 3-398S
  • Engine: Ford 4.0L SOHC V6
  • Kit contents: 13 pieces, including primary timing chain, balance shaft chain, timing chain guides, and tensioners
  • Item weight: 7.68 pounds
  • Package dimensions: 18.5 x 16.75 x 3.5 inches

Ford’s 4.0L SOHC V6 uses an unusual jackshaft layout with chain cassettes at the front and rear of the engine, and its tensioners and cassette guides are well-known wear items in Explorers, Rangers, Sport Tracs, Mountaineers, and Mazda B4000s. Melling’s 3-398S addresses the system as a whole, including the balance shaft chain that simpler kits skip. Melling is a long-standing OE-style supplier, and this kit suits owners who want stock-specification replacement parts rather than a performance set. Be aware the rear cassette on this engine can require engine removal on some models, so check the service procedure for your vehicle before starting.

INGKAN 3.6L Timing Chain Kit with Water Pump and Oil Pump

Specs

  • Model number: AHM-QMP-I08J0437 (90753S)
  • Engines: GM 2.8L, 3.0L, and 3.6L DOHC V6 (High Feature family)
  • Chains: 1 primary chain (96 links) and 2 secondary chains (114 links)
  • Also includes: water pump with gasket, oil pump, 2 VVT solenoids, 2 idler sprockets, crank sprocket, 3 tensioners, and 6 guide rails
  • Package dimensions: 13.86 x 9.29 x 8.11 inches
  • Example fitment: Chevrolet Traverse, Equinox, Camaro, and Malibu; GMC Acadia; Buick Enclave; Cadillac CTS and SRX

GM’s High Feature V6 stretches its chains when oil changes are stretched, and the repair is labor-heavy because three chains drive four camshafts. This INGKAN kit follows the Cloyes 9-0753S pattern and goes further by adding the water pump and oil pump, both of which live behind the timing cover on these engines. For an Acadia, Traverse, Enclave, or CTS already showing timing correlation codes, replacing the pumps during the same teardown avoids paying for the same labor twice. Verify your exact year and engine code against the listing’s fitment list, since this family spans many models from 2007 onward.

Gledewen 2.4L Timing Chain Kit with Water Pump

Specs

  • Manufacturer part number: A2221
  • Engines: Honda K24A4 and K24A8 2.4L DOHC i-VTEC
  • Cam chain: 176 links; crank sprocket is a combo 23T/34T design
  • Includes: timing chain kit with water pump
  • Cross reference: Honda 14401-R40-A01, 14510-PNA-003, 14520-RAA-A01, 14210-PNA-000
  • Fitment: Honda Accord 2003-2007, CR-V 2002-2009, Element 2003-2011, Acura TSX 2004-2008

Honda’s K24 is a durable engine, but high-mileage examples stretch chains and wear the VTC actuator, producing the classic startup rattle. This Gledewen kit covers the earlier K24A4 and K24A8 versions found in the Accord, CR-V, Element, and TSX, and it includes the water pump so the cooling side is refreshed while the front of the engine is apart. Note the listing’s caution that the included exhaust cam sprocket does not suit the TSX’s K24A2, a good reminder to match engine codes carefully. Fresh oil after the job is essential, because the K24’s tensioner and VTC system are both oil-pressure driven.

Usage Notes

Set the engine to top dead center on the compression stroke and confirm every timing mark before removing the old chain, then turn the engine over by hand through two full revolutions after installation to confirm nothing binds and the marks still align. On interference engines such as the Ford 5.4L 3V, GM 3.6L, and Honda K24, a chain that jumps timing can bend valves, so never crank the engine with the starter until hand rotation checks out.

Follow the vehicle maker’s torque specs and sequences for every sprocket, phaser, and guide bolt. Several of these engines use torque-to-yield fasteners that stretch once and must be replaced; reusing them risks a phaser or sprocket coming loose. Keep the new chain clean, pre-lube guides and tensioners where the service information calls for it, and prime hydraulic tensioners as directed. After the first start, listen for rattle, check for leaks at the timing cover, and change the oil and filter, since debris from worn guides often circulates with the old oil.

FAQ

What are the symptoms of a worn timing chain?

The classic signs are a brief rattle on cold starts, a check-engine light with camshaft correlation or timing over-advanced codes, rough idle, and reduced power. Metallic debris in the oil or on the drain plug magnet supports the diagnosis.

Can I replace just the chain instead of the whole kit?

You can, but it is rarely wise. The guides and tensioner wear at roughly the same rate as the chain, and a new chain running on grooved guides will wear quickly and may still rattle. Since the labor to reach the chain dwarfs the parts cost, a complete kit is the sensible repair.

How long should a timing chain last?

There is no fixed service interval like a timing belt. Many chains last well beyond 150,000 miles with clean oil, while neglected engines, particularly the GM 3.6L and Ford 5.4L 3V, can need chains much earlier. Oil change discipline is the biggest factor in chain life.

What happens if a timing chain fails on an interference engine?

If the chain breaks or jumps far enough, the pistons can strike open valves, bending valves and sometimes damaging pistons and the cylinder head. That turns a timing job into an engine rebuild, which is why early symptoms should not be ignored on these engines.

Do I need special tools to install a timing chain kit?

Usually, yes. Most of these engines need camshaft holding tools or timing pins to lock the cams and crank in position, plus a torque wrench and, for torque-to-yield bolts, an angle gauge. The Ford 4.0L SOHC additionally needs its specific timing tool set because it has no conventional keyway timing on the cams.

Conclusion

The right timing chain kit is the one that matches your engine exactly and replaces the whole wear system at once: chains, guides, tensioners, sprockets, and phasers where fitted. Choose the Dorman set for a phaser-knocking 5.4L 3V, the Cloyes or Melling kits for stock-spec Ford repairs, the INGKAN bundle when a GM 3.6L also needs its pumps, and the Gledewen kit for an early K24 Honda. Verify fitment by engine code, follow factory torque procedures, and the repair should restore quiet, accurate timing without guarantees being needed about parts you have not inspected.

A
Autozane Editorial Team
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Timing Chain Kits: Complete Sets for Common…Check price on Amazon

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free
Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account

As an Amazon Associate we earn from qualifying purchases.