Key takeaways
- Fix a cracked or warped exhaust manifold with the right kit. Compare five manifold kits for Ram, Ford and Jeep trucks, with fitment and hardware notes.
Disclosure: As an Amazon Associate, I earn from qualifying purchases.
A ticking or tapping noise on a cold start that fades as the engine warms up is the classic sign of a cracked exhaust manifold or a warped mounting flange: the gap opens when the metal is cold and partly seals as heat expands it. It is tempting to treat that noise as a nuisance, but a leak at the manifold can let exhaust gas, including carbon monoxide, escape under the hood and find its way into the cabin. Treat a manifold leak as a safety repair, not a cosmetic one.
Most replacement manifolds are vehicle-specific kits for one bank of the engine, and the applications below cover the engines that crack manifolds most often: the Ram and Jeep 5.7L Hemi, the Ford 5.4L modular V8, and the Jeep 4.0L inline-six. Match the part number to your exact year, engine and side before ordering, because left and right manifolds are different castings.
How to Choose
Confirm the diagnosis first. Soot streaks around a port, a visibly cracked casting, or broken studs confirm the manifold is at fault. A tick can also come from a lifter or a leaking flange gasket further downstream, so inspect before spending money on castings.
Budget for the hardware fight, not just the part. On high-mileage trucks the manifold itself is often the easy half of the job. Studs snap flush with the cylinder head, and removing them can mean penetrating oil, stud extractors, or drilling and re-tapping. A kit with new studs, nuts and gaskets saves a second parts run.
Material and design. Cast iron and ductile iron manifolds crack from repeated heat cycles; ductile iron flexes slightly more and is the common upgrade. Ceramic coatings spread heat more evenly across the casting. Tubular stainless designs, like the Jeep kit below, use flex bellows to absorb expansion instead of fighting it.
Manifold or headers? Tubular headers flow better than a log-style manifold, but they add underhood heat, more noise, and real fitment pain around steering shafts and starters. On a stock daily driver they are not automatically an upgrade; a quality replacement manifold restores the seal and the quiet without new problems.
Emissions and legality. The manifold often carries the upstream oxygen sensor and bolts directly to the catalytic converter, and on many newer vehicles the converter is integrated into the manifold itself. Removing or altering emissions equipment is illegal for road use in many places, so choose a replacement that keeps the factory sensor and converter arrangement intact.
The 5 Products
1. Dorman 674-498 OE FIX Passenger Side Exhaust Manifold Kit (Ram/Jeep 5.7L Hemi)
Specs
- Part number: Dorman 674-498 (OE FIX line)
- Fitment: Passenger side, Ram 1500 and Jeep Wagoneer with 5.7L Hemi V8
- Material: Ductile iron with ceramic coating
- Design upgrades: Integrated upper flange and thicker lower flange versus the original casting
- OE cross-reference: 68591572AB
- Weight/dimensions: 15.5 lb; 19.5 x 8.6 x 5.6 in
- Includes manifold, gaskets and mounting hardware
The factory Hemi manifolds on cylinder-deactivation engines are known for cracking as the thermal cycling works on thin flange sections. Dorman’s OE FIX version reinforces exactly those areas, tying the runners together with an integrated upper flange and thickening the lower flange, then adds a ceramic coating for more even heat distribution. If your Ram or Wagoneer ticks on cold starts and the passenger side is the culprit, this is the most direct fix. The driver side is a separate part number, so confirm which bank is leaking before ordering.
2. Dorman 674-922 Driver Side Exhaust Manifold Kit (Dodge/Jeep 5.7L Hemi)
Specs
- Part number: Dorman 674-922 (patented design)
- Fitment: Driver side, select Dodge Ram 1500/2500/3500 and Jeep models with 5.7L Hemi V8
- Material: Cast iron
- OE cross-references: 53034137AC, 68045559AA, 68045559AB
- Includes required gaskets and hardware for installation
For the earlier Hemi trucks, the 674-922 covers the driver side with a patented casting matching the original’s port layout and flange pattern. It is a straightforward stock replacement rather than a redesigned upgrade. As with any Hemi manifold job, expect at least one stubborn stud and have extractors on hand. Use the gaskets in the box rather than reusing the compressed originals.
3. Dorman 674-694XD Ceramic Coated Passenger Side Exhaust Manifold Kit (Ford/Lincoln 5.4L)
Specs
- Part number: Dorman 674-694XD
- Fitment: Passenger side, select Ford and Lincoln models with the 5.4L V8 (F-150, Expedition, Navigator era applications)
- Finish: Ceramic coating for even heat distribution and corrosion resistance
- OE cross-references: 3L3Z-9430-DA, 7C3Z-9430-A
- Warranty: Limited lifetime
- Kit format: Manifold (order gaskets and hardware separately if not already on hand)
The Ford 5.4L is the other repeat offender for cracked manifolds and broken studs, especially in trucks that tow. The 674-694XD addresses the heat side of the problem: its ceramic coating evens out hot spots that drive thermal cracking and keeps the casting from rusting the way bare iron does. Because this listing is the manifold itself, check what gaskets and studs you need before the truck is apart. On 5.4L applications, broken studs are close to guaranteed, so penetrating oil applied the night before is time well spent.
4. A-Premium 2PCS Exhaust Manifold Kit, Left and Right (Ford 5.4L)
Specs
- Part number: A-Premium APEMD155
- Fitment: Ford F-150 1999-2003, F-150 Heritage 2004, F-250 1999, Expedition 1999-2002, 5.4L V8
- Format: Pair kit covering both left and right sides
- OE cross-references: 674-460, 674-559, XL3Z9430GA, XL3Z9431FA, 2L1Z9431CA
- Includes gaskets, studs and nuts
When both banks of an older 5.4L are ticking, or one side is cracked and the other is the same age and mileage, a matched pair kit is the efficient route. This A-Premium set covers the 1999-2004 F-Series and Expedition applications and cross-references the common Dorman numbers for this engine, including 674-559. Doing both sides in one session also means the intake and accessory removal work is only done once. Verify your truck’s build date, since the 2004 Heritage is a split year with two different F-150 body styles in production.
5. A-Premium 2PCS Front and Rear Exhaust Manifold Kit (Jeep 4.0L, 2000-2006)
Specs
- Part number: A-Premium APEMD197
- Fitment: Jeep Grand Cherokee 1999-2004, Cherokee 2000-2001, Wrangler/TJ 2000-2006, 4.0L inline-six
- Format: Two-piece set (front and rear manifold sections, as the later 4.0L design uses)
- Weight: 24 lb; package 29.13 x 11.42 x 9.06 in
- Includes gaskets, bolts and nuts
From 2000 onward, the Jeep 4.0L switched to a two-piece exhaust manifold with twin outlets. This kit replaces the pair together, which matters because the two castings age at the same rate and a leak at the joint between sections is a common misdiagnosis. The 4.0L’s shared intake/exhaust gasket means the intake manifold comes off too, so allow a full afternoon for the job. Confirm your Jeep is the later split-manifold design; 1991-1999 models use a single-piece manifold instead.
Usage and Buying Notes
Start every manifold job on a fully cold engine. Manifolds hold heat long after shutdown, and a casting that looks safe to touch can still cause a severe burn. Disconnect the battery if you will be working near the starter, and soak every stud with penetrating oil well in advance.
Always install new gaskets and hardware. Old gaskets have taken a compression set and will not seal twice, and stretched or corroded studs are the ones that snap on the next removal. Torque the fasteners in the sequence the manufacturer specifies, working from the center outward, and use the torque value for your engine rather than a generic figure. Recheck for leaks at the first cold start, when a remaining gap is loudest.
If a stud breaks off in the head, stop and assess before drilling freehand: a misaligned drill can damage the head’s threads or the head itself. Right-angle drills, left-hand bits and stud extractors exist for this situation, and on some trucks a shop with a welder can remove a broken stud faster than any home method.
Finally, remember what the manifold connects to. Disturbing a rusty downpipe flange can move the repair downstream, and seized oxygen sensors may not survive removal. Having a replacement sensor and flange hardware on hand keeps the job moving.
FAQ
Q: What are the signs of a cracked exhaust manifold?
A ticking or tapping that is loudest on a cold start and quiets as the engine warms is the textbook symptom. Soot marks around one port, a visible crack, broken studs, or an exhaust smell in the cabin confirm it. A scan tool may also show fuel-trim codes if the leak is ahead of the oxygen sensor.
Q: Can I keep driving with a leaking exhaust manifold?
Short, careful trips are usually possible, but it should not be put off. Exhaust gas under the hood can include carbon monoxide that reaches the cabin, the leak erodes the flange and head surface over time, and a leak before the oxygen sensor can skew fuel mixture. Treat it as a prompt safety repair.
Q: Should I replace both manifolds on a V8 at the same time?
Only if both are leaking or the second side shows cracks or broken studs. The two sides age similarly, so a same-mileage opposite bank is a reasonable preventive replacement while everything is apart, but a sound manifold does not need to be replaced on principle.
Q: Are headers a better choice than a replacement manifold?
Headers flow better and can add power on a modified engine, but on a stock daily driver they bring more heat, more noise, possible clearance problems, and emissions complications where the converter position changes. A quality replacement manifold is the better repair for most trucks.
Q: Why do manifold studs break, and how do I avoid it?
Thousands of heat cycles plus corrosion weld the stud to the head and flange. Penetrating oil, patience, and working the fastener back and forth instead of forcing it in one direction reduce the risk. Always fit new studs and nuts so the next removal starts with healthy threads.
Conclusion
A manifold replacement is mostly a hardware job: the right casting matters, but new gaskets, new studs and a patient removal decide whether the repair lasts. For Hemi trucks, the reinforced Dorman OE FIX kits address the original cracking points; Ford 5.4L owners get ceramic-coated and pair-kit options; and the later Jeep 4.0L is best served by replacing both sections together. Confirm the side, engine and part number, keep the factory emissions layout intact, and the cold-start tick will be gone.
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeA free business account with business pricing and bulk-buying tools for work, shop or home office.
Create a business accountAs an Amazon Associate we earn from qualifying purchases.




