Updated Nov 21, 2026· 8 min read

Key takeaways

  • Shopping for the best brake shoes? Compare five bonded and riveted drum brake shoe sets by size, hardware and fitment, plus the safety checks that matter.

Disclosure: As an Amazon Associate, I earn from qualifying purchases.

Our top pick: ACDelco Silver 14514B Bonded Rear Drum Brake Shoe Set. Runner-up: Wagner QuickStop Z551 Drum Brake Shoe.

Disc brakes get the attention, but millions of cars, trucks and SUVs still rely on rear drum brakes — and when the linings wear thin, the pedal sinks and the parking brake stops holding on hills. Inside every drum hides a nest of springs, hold-down pins, levers and a star-wheel adjuster, and assembling it wrong has real consequences. Brakes are life-safety equipment. If you are not fully confident in the job, the right move is a shop — there is no savings worth a soft pedal. This guide compares five shoe sets from established brands and covers the sizing, hardware and safety points that decide whether the job ends well.

How to Choose Brake Shoes

Match the application exactly. Brake shoes are not universal parts. They are sold by drum diameter and lining width — a 9-inch shoe does not fit a 10-inch drum, and a lining a few millimeters too wide will not sit under the drum at all. Always order by year, make, model and, where the catalog asks, drum size. Many vehicles came with two drum sizes in one model year, so measure the inside diameter if in doubt.

Bonded vs riveted. On a bonded shoe, the friction lining is glued to the steel shoe with high-temperature adhesive; on a riveted shoe, it is mechanically fastened with rivets. Bonded linings can be used slightly thinner before they are spent, because there are no rivet heads to score the drum. Riveted shoes are the traditional design and remain common on heavier trucks. Either is safe when it matches the original specification — follow what the vehicle maker fitted.

Buy the axle set, and budget for hardware. Shoes are always replaced as an axle set — both wheels, never one side — so the axle brakes evenly. The hardware kit is part of the job, not an optional extra: return springs lose tension with heat and age, hold-down springs fatigue, and a worn self-adjuster stops taking up slack. Tired springs cause dragging brakes, uneven lining wear and a low pedal that no adjustment fixes for long. A fresh hardware kit costs little next to opening the drums twice.

Plan the inspection, not just the swap. With the drum off, peel back the wheel cylinder’s dust boots and look for seepage. A weeping cylinder must be replaced before new shoes go in, and brake fluid must never contaminate new linings — fluid-soaked friction material is ruined and grabs unpredictably. Check the drum itself, too. Every drum has a maximum machining diameter stamped or cast into it; a drum worn or scored beyond that limit gets replaced, not turned.

The 5 Best Brake Shoes

1. ACDelco Silver 14514B Bonded Rear Drum Brake Shoe Set

Specs

  • Brand line: ACDelco Silver (Advantage)
  • Manufacturer part number: 14514B (GM 19285949)
  • Construction: Bonded friction lining
  • Position: Rear drum brakes
  • Sold as: Complete axle set, ready to install out of the box

ACDelco’s Silver line is the value tier from General Motors’ own parts arm, and the 14514B is a sensible default for GM vehicles and the many other makes the catalog covers: a bonded lining on a steel shoe, supplied as a matched axle set ready to install out of the box. ACDelco rates its shoes for a stable friction coefficient across temperature swings, which keeps rear drum braking predictable rather than grabby when cold or faint when hot. Confirm the drum diameter for your application before ordering — the catalog splits applications finely.

2. Wagner QuickStop Z551 Drum Brake Shoe

Specs

  • Brand line: Wagner QuickStop
  • Part number: Z551
  • Friction material: OE-matched formulation
  • Lining preparation: Precision-ground for full drum contact
  • Position: Drum brake applications per catalog fitment

Wagner is one of the oldest names in friction, and its QuickStop shoes are built around two ideas: an OE-matched friction material, so pedal feel and stopping behavior stay close to factory, and precision-ground linings that maximize friction-to-drum contact from the first stop. That matters on drums: a shoe whose arc does not match the drum touches only in patches until it beds in, which means noise and uneven wear. Look up your vehicle in the Wagner catalog and order the number it specifies — the Z551 is just one entry in a very deep list.

3. Bosch BS627 Blue Drum Brake Shoe Set

Specs

  • Brand line: Bosch Blue
  • Part number: BS627
  • Position: Rear axle
  • Fitment: Select Honda Accord, Civic, CR-V and Fit models
  • Set contents: Four shoes for both rear wheels

Bosch’s Blue line is its everyday replacement range, and the BS627 covers a cluster of popular Honda rear-drum applications — Accord, Civic, CR-V and Fit models that kept drums on the rear axle well into recent years. The set supplies four shoes, enough for both rear wheels. Bosch designs the Blue shoes for consistent, OE-style braking rather than any performance claim, which suits these cars: their rear drums do a modest share of the braking and carry the parking brake, so even wear is the goal. Verify your model year against the fitment list, since Honda changed drum sizes between generations.

4. Centric Premium 111.05690 Rear Drum Brake Shoe

Specs

  • Brand line: Centric Premium
  • Part number: 111.05690
  • Position: Rear drum brakes
  • Fitment: Select Ford Aerostar, Bronco II, Fairmont, Granada, LTD and Mustang; Mazda B2300, B3000 and B4000
  • Lining: 100% asbestos-free, precision-ground, OE-style

Centric’s Premium shoes are a go-to for older Ford cars and trucks, and the 111.05690 set fits a long list of them, from the Mustang and LTD to the Aerostar van and the Mazda B-series pickups that shared Ford hardware. Centric precision-grounds the linings, supplies OE-style pins and levers where the application uses them, and uses asbestos-free friction material. The shoes you remove from a decades-old Ford may not be asbestos-free, though. Treat old drum dust with respect — no compressed-air blowouts; wet-clean the backing plate or use a proper brake vacuum, and wear a respirator.

5. Power Stop B701 Autospecialty Parking Brake Shoe

Specs

  • Brand line: Power Stop Autospecialty
  • Part number: B701
  • Friction material: Semi-metallic, post-cured
  • Construction: Bonded, 100% asbestos-free and copper-free
  • Position: Rear parking brake (drum-in-hat)
  • Fitment includes: 1996–2002 Ford Crown Victoria, 1995–2001 Ford Explorer, 1993–1998 Jeep Grand Cherokee, among others

Many disc-brake cars and SUVs hide a small drum brake inside the rear rotor hat that works only as the parking brake, and its shoes wear and rust like any other. The Power Stop B701 is built for exactly that job across a wide range of Ford, Lincoln, Mercury and Jeep applications. The semi-metallic lining is post-cured, which shortens break-in, the shoes are precision arc-ground for proper fit, chamfered to prevent noise and chatter, and made from new steel coated to resist rust, the usual killer of parking brake shoes. If your parking brake lever travels to the top of its stroke and the car still rolls on a slope, these little shoes — not the cable — are a prime suspect.

Usage and Buying Notes

Work one side at a time. Drum hardware looks symmetrical but is not: springs, levers and the self-adjuster differ left to right, and assembling them mirrored is the classic beginner mistake. Finish one wheel completely while the other side stays assembled as your reference — or photograph the assembly from several angles before touching a spring.

After assembly, set the initial adjustment so the drum just slips over the shoes with light drag, then let the self-adjuster finish through normal driving, including the firm reverse stops many systems need to ratchet the adjuster. The parking brake should hold the car on a grade within normal lever travel once the shoes are adjusted; adjusting the cable to compensate for worn shoes only stretches the cable.

Bedding new shoes is gentle: a series of moderate stops from city speeds, with cooling time between them, seats the lining arc to the drum. Expect the pedal and parking brake to improve over the first few hundred miles as the contact patch widens. If a wheel drags, squeals persistently or the car pulls under braking, open it back up — those symptoms point at hardware placement or a contaminated lining, not parts that need more time.

FAQ

How long do brake shoes last?
Rear drum shoes commonly last far longer than front pads — often 60,000 miles or more — because the rear axle does a minority of the braking. Longevity drops sharply if a dragging adjuster, sticking wheel cylinder or seized parking brake cable keeps a shoe against the drum.

Can I replace brake shoes on just one wheel?
No. Shoes are replaced as an axle set, both wheels together. A new lining on one side and a worn one on the other gives uneven friction across the axle, which can pull the car under braking and unbalances the parking brake.

What is the difference between bonded and riveted shoes?
The lining attachment. Bonded shoes glue the friction material to the steel shoe; riveted shoes fasten it mechanically. Bonded linings can wear slightly thinner before replacement because there are no rivet heads to protect, but either type is correct when it matches the original specification.

Do I need a hardware kit with new shoes?
Yes — treat it as part of the same job. Return springs, hold-down springs and self-adjusters fatigue with heat cycles, and tired hardware causes dragging, uneven wear and a pedal that will not stay adjusted. The kit is inexpensive next to opening the drums a second time.

Why does my parking brake still not hold after new shoes?
Usually adjustment, not the shoes. The shoe-to-drum clearance must be set at the star wheel first; only then is the cable adjusted. A stretched or seized cable, or a drum worn beyond its maximum diameter, will also defeat new shoes, so measure the drum before blaming the linings.

Conclusion

Drum brakes reward patience and punish shortcuts. Order by exact application and drum size, match bonded or riveted to the original specification, replace both wheels as an axle set with fresh hardware, and use the open drum to inspect the wheel cylinders and measure the drum against its stamped maximum. The five sets above cover the common jobs, from GM and Honda rear drums to older Fords and drum-in-hat parking brakes. And keep the standing rule in view: brakes are life-safety parts, so if any step feels beyond you, a professional shop is the right call.

A
Autozane Editorial Team
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Brake Shoes: 5 Drum Brake Picks for…Check price on Amazon

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free
Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account

As an Amazon Associate we earn from qualifying purchases.