Updated Nov 21, 2026· 8 min read

Key takeaways

  • Compare the best tailgate assist kits for Ford, Chevy, GMC and Ram trucks, with fitment by model year, install notes and what a damper can and cannot do.

Disclosure: As an Amazon Associate, I earn from qualifying purchases.

Our top pick: Dee Zee DZ43204 Tailgate Assist (Ford F-150, 2015 and Newer). Runner-up: Dee Zee DZ43200 Tailgate Assist (Ford F-150, 2004–2014).

A pickup tailgate is a heavy slab of steel, and on most trucks nothing slows it down. Pop the handle and it falls the full arc, slamming onto its support cables with a bang. Over time the cables and hinges take a beating — and anyone in the drop zone, a kid or a dog, is in the way of real weight moving fast.

A tailgate assist kit fixes that one problem. It adds a small gas strut between the bed side and the tailgate. When you release the handle, the strut resists the fall and lowers the gate in a slow, controlled glide instead of a free fall. It is a simple but narrowly focused upgrade, so this guide covers the five kits worth considering — and what they do not do.

How to Choose

Start with fitment, because it decides everything else. A tailgate assist is not a universal part: the strut mounts to specific factory points, and its length and damping force are matched to that gate’s weight. A kit built for a 2010 F-150 will not fit a 2020 Silverado, and it will not fit a 2020 F-150 either. Confirm your exact truck against the listing before ordering.

Next, understand what the strut actually does: it only controls the opening drop. It does not help you lift the gate closed — closing effort is exactly the same as before — and it does not increase the tailgate’s load capacity by a single pound. If your truck already has a factory damped or power tailgate, an aftermarket kit adds nothing.

Almost every kit here mounts on the driver’s side only, and the sides are not interchangeable. Dee Zee, the dominant name in this category, states plainly that fitting its strut on the passenger side can let the tailgate come off the truck, because that side is the hinge the gate lifts out of when removed. One kit per truck is all you can fit.

Installation is genuinely easy: no drilling, basic hand tools, typically under 30 minutes. The fiddliest step is seating a blind nut (nutsert) into an existing hole in the bed, and the kits include the tool for it. During the first test cycles, keep hands and children clear of the gate until the strut is confirmed seated on both ball mounts.

Lifespan matters too. A gas strut loses damping gradually as its seals age, and the warning sign is simple: a gate that used to glide down starts dropping faster, or lands the last few inches with a thud. That is the strut telling you it is done.

The Kits

Dee Zee DZ43204 Tailgate Assist (Ford F-150, 2015 and Newer)

Specs

  • Fits: Ford F-150, 2015 to current model years
  • Damper type: Single dampened gas strut
  • Mounting: Driver’s side only; ball mount plate and lower ball mount included
  • Drilling: None; uses factory holes and the tailgate’s existing fastener points
  • Tailgate removal: Strut unclips from ball mounts; gate still removable
  • Warranty: 3-year limited warranty

The DZ43204 is the default pick for the huge number of 2015-and-newer F-150s on the road without a factory damper. It covers both the 2015–2020 trucks and the current generation, and the kit includes the shock, mounting plate, hardware and a Torx wrench, plus a protection film sheet to keep the strut body from rubbing paint. Damping is well judged for the aluminum gate on these trucks — a smooth, even descent rather than a slow-motion creep.

Dee Zee DZ43200 Tailgate Assist (Ford F-150, 2004–2014)

Specs

  • Fits: Ford F-150 2004–2014 (Styleside bed, not Flareside) and Lincoln Mark LT 2004–2014
  • Damper type: Single dampened gas strut
  • Mounting: Driver’s side only; ball mount plate, ball mount and blind nut (nutsert) included
  • Drilling: None; nutsert seats in an existing hole by the tailgate pivot
  • Tailgate removal: Strut unclips from ball mounts; gate still removable
  • Warranty: 3-year limited warranty

Older F-150 gates are heavier steel, and they slam accordingly. The install centers on the nutsert: you set the blind nut into the opening by the tailgate pivot with the included tool, torque the ball mount to spec, and clip the shock on. A Mylar sheet protects the paint where components pass close during the swing. Dee Zee’s own FAQ for this kit is blunt about the driver’s-side rule — the unit will not work on the passenger side, and fitting it there can cause the tailgate to come off the truck — so follow the layout exactly.

Dee Zee DZ43102 Tailgate Assist (Chevy Silverado and GMC Sierra)

Specs

  • Fits: Chevrolet Silverado and GMC Sierra 1500, 2007–2018; HD 2500/3500, 2007–2019
  • Damper type: Single dampened gas strut
  • Mounting: Driver’s side only; brackets, hardware and thread locker included
  • Drilling: None; all parts specific to the year, make and model
  • Tailgate removal: Strut unclips from ball mounts; gate still removable
  • Warranty: 3-year limited warranty

For GMT900 and K2XX generation GM trucks, the DZ43102 is the matched kit, spanning the 2007–2018 half-tons and the 2007–2019 heavy-duty 2500 and 3500 trucks. It follows the same recipe — one gas shock working alongside the factory cables, all hardware in the box — and the current version ships with an improved nutsert with thread lock pre-applied. If your Silverado or Sierra predates GM’s factory damped tailgates, this restores the same soft-lowering behavior with a few minutes of wrench work.

Dee Zee DZ43301 Tailgate Assist (Ram 1500, 2500 and 3500)

Specs

  • Fits: Ram 1500 2009–2018 and Ram 1500 Classic 2019 and newer; Ram 2500/3500 2010 and newer
  • Damper type: Single dampened gas strut
  • Mounting: Driver’s side only; ball mount plate, nutsert, nutsert tool and cable clip included
  • Drilling: None; requires removing the factory tailgate motion limiter during install
  • Tailgate removal: Strut unclips from ball mounts; gate still removable
  • Warranty: 3-year limited warranty

The Ram kit has one extra step worth knowing about: the factory motion limiter on the tailgate cable has to come off, and the included cable clip must be pressed onto the cable at the measured position. Dee Zee is explicit that skipping either step lets the cable bind or get caught between the shock and the bed, which can damage the truck — so this is not an optional detail. With that done, 2009-and-up Ram trucks, including the long-running 1500 Classic, get the same one-handed, no-bang opening as the Ford and GM kits.

Dee Zee DZ43203 Tailgate Assist (Ford Super Duty)

Specs

  • Fits: Ford F-250 and F-350 Super Duty, 1999–2016
  • Damper type: Single dampened gas strut
  • Mounting: Driver’s side only; all mounting hardware included
  • Drilling: None; installs in under 30 minutes with household tools
  • Tailgate removal: Strut unclips from ball mounts; gate still removable
  • Warranty: 3-year limited warranty

Super Duty tailgates of this era are among the heaviest fitted to any pickup, and they were sold for years with no damping at all, which is why the DZ43203 exists. It covers the 1999–2016 F-250 and F-350 with the same single-shock layout, working with the factory cables rather than replacing them. Be realistic about the result: the strut turns a genuinely dangerous free fall into a controlled lower, but a gate this heavy will never feel fingertip-light, and closing it still takes the same effort as always.

Usage and Buying Notes

Order by part number, not by appearance. All of these struts look nearly identical in photos; the difference between kits is bracket shape, strut length and mounting hardware. If a listing’s fitment checker disagrees with the part number’s stated application, trust the part number and the manufacturer’s application chart.

Remember that the factory support cables still carry the gate’s load when it is open. The assist slows the descent; it does not hold the gate up, and it is not a substitute for a frayed or rusted cable. If your cables are stretched or corroded, replace them first.

Keep the strut’s working area clean. Grit on the polished rod gets dragged past the seal every cycle and shortens the strut’s life, so a quick wipe is worthwhile. Periodically check both mounting points for tightness, especially after the first few weeks.

If your tailgate comes off regularly — for a slide-in camper or a flatbed swap — confirm the strut unclips by hand before buying. The Dee Zee kits above pop off their ball mounts, but the mounts stay on the truck.

FAQ

Does a tailgate assist help lift the tailgate closed?

No. The strut only resists the gate as it opens, slowing the drop; closing effort is unchanged. Products that genuinely help with lifting are torsion-bar style lift assists, a different device entirely.

Will a tailgate assist increase my tailgate’s load capacity?

No. Load capacity is set by the gate, its hinges and its support cables, and none of those change. The strut only controls how fast the gate falls, and cargo resting on the open gate is still limited by the truck maker’s original rating.

Can I install the strut on the passenger side instead?

No. These kits are engineered for the driver’s side only, and the sides are not interchangeable. On Ford trucks, the passenger side is the hinge the tailgate lifts out of for removal, and Dee Zee warns that fitting the assist there can cause the tailgate to come off the truck.

How do I know when the strut needs replacing?

The signs are gradual: the gate starts dropping faster than it used to, free-falls the first part of the arc before the damping catches, or lands with a thud it did not make before. Any of those means the gas charge or seals are worn out. Replacement is quick, since the mounts are already installed.

My truck already has a slow-lowering tailgate. Do I need a kit?

No. If your truck came with a factory damped, torsion-assisted or power tailgate, it already has this function built in, and an aftermarket strut adds nothing. These kits are for trucks whose gates free-fall from the factory — most older and lower-trim pickups.

Conclusion

A tailgate assist does exactly one thing, and does it well: it turns a slamming free fall into a controlled, one-handed lower. The five kits above cover the F-150 in both steel and aluminum generations, the Silverado and Sierra, the Ram 1500 through 3500, and the Super Duty. Pick the part number matched to your truck, respect the driver’s-side-only mounting, and keep expectations set correctly: it will not help you close the gate or carry more weight, but your cables and hinges will notice the difference.

A
Autozane Editorial Team
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Tailgate Assist Kits for a Softer, Safer…Check price on Amazon

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free
Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account

As an Amazon Associate we earn from qualifying purchases.