Updated Nov 21, 2026· 8 min read

Key takeaways

  • Compare the best door logo projector lights: plug-in puddle lights for Tesla, Audi and Subaru, plus wireless stick-on picks, with fitment and fading tips.

Open a car door at night and a crisp logo blooms on the pavement below — that is the whole appeal of car door logo projector lights. They replace or supplement the small courtesy lamp in the bottom of the door, projecting an emblem onto the ground each time the door opens. It is a purely cosmetic upgrade, but an easy one — provided you buy the right type for your car.

Our top pick: LOWEEY Wireless Rechargeable Car Door Lights. Runner-up: DoYoMo Highland Cow Wireless Door Projector.

That matters more than the brand on the box. These lights come in two completely different families — plug-in units that replace a factory puddle light, and battery-powered stick-on units that work on almost anything — and picking the wrong family means picking a light that cannot be installed on your car at all. This guide explains how to tell which family your car needs, then rounds up five options across both types.

Disclosure: As an Amazon Associate, I earn from qualifying purchases.

How to Choose

Start with what is already in your door. Look at the bottom edge of the door panel. If there is a small rectangular lamp housing there, you likely have a factory puddle light, and a plug-in projector made for your make and model range is the cleanest upgrade — it uses the car’s own wiring and needs no batteries. If there is only a reflector or a blank plug, there is no powered light to replace, as on many base-trim cars. For those, a wireless stick-on projector is the only option.
Fitment is vehicle-specific, not universal, on plug-in models. Housings and connectors differ by make, model, and often by generation. A unit listed for one brand’s door lamp will not clip into another brand’s door, and a mid-cycle refresh can change the connector. Check the seller’s compatibility list against your exact model year, and look for “dual plug” designs if your car could have either of two connector styles.

Understand the fading problem before you pay for “HD.” Almost every projector shines its LED through a small printed film slide carrying the logo. Heat and UV slowly bleach and yellow that film, so a logo that looks sharp in month one can look washed out by the second summer. “Never fade” listings generally use better film or a coated lens and last longer — but no film is immortal. Treat the film as a wear item and prefer sellers that include spare slides.

For stick-on models, the sensor is the weak point. Wireless units wake up when a small magnet on the door sill moves away from the sensor as the door opens, and sleep when the magnet comes back. If the magnet is misaligned or the gap too wide, the light either never triggers or stays on and drains its batteries. Adhesive matters too: the pad needs a clean, dry, ideally warm surface to hold through summer heat and door slams.

The 5 Best Car Door Logo Projector Lights

1. LOWEEY Wireless Rechargeable Car Door Lights — Best Stick-On Pick

Specs:
– 2 projectors per pack, stick-on adhesive mounting
– USB rechargeable — no disposable batteries
– Infrared sensor: on at door open, off at close
– 6 pairs of interchangeable logo slides included
– Universal fit; waterproof housing

If your door has no factory puddle light to replace, this is the most sensible design in the category. The units stick to the inside bottom edge of the door, sense the door opening, and project one of the included logo slides onto the ground. USB recharging removes the biggest annoyance of wireless door lights — fishing out dead coin cells — and swappable slides mean a faded design is a two-minute fix, not a new purchase. The trade-offs are the usual stick-on ones: the adhesive wants a clean, warm surface, and sensor alignment must be set carefully or the light will misfire.

2. DoYoMo Highland Cow Wireless Door Projector — Best Novelty Design

Specs:
– 2 projectors per pack, fixed Highland cow design
– Powered by 3 AAA batteries per unit (not included)
– Magnetic induction sensor: on at door open, off at close
– ABS housing, adhesive mounting, universal fit
– Not water resistant — keep to the door’s inside edge

Not everyone wants a carmaker’s badge on the pavement. This pair projects a Highland cow instead, which tells you who it is for: drivers who treat the welcome light as a joke, a gift, or a bit of personality rather than a brand statement. The magnetic sensor is the classic wireless arrangement, so the sill magnet must sit directly under the unit with a small gap, and the AAA batteries are an ongoing errand the rechargeable pick above avoids. The design is fixed — no swappable slides — and the housing is not rated for water exposure.

3. LOWEEY Door Logo Projectors for Tesla — Best Plug-In for Tesla

Specs:
– Plug-in replacement for the factory Tesla puddle light
– Fits Model 3, Y, X and S with factory door lights
– “No Fade 4K-HD” film, white Tesla-style logo
– Runs on the car’s 12-volt door circuit — no batteries
– Model Light-001; pry-out, plug-in installation

Tesla fits a simple puddle light in its doors, making it one of the easiest cars to upgrade: pry out the factory unit, plug this projector into the same connector, and push it back into the housing. Running on the car’s own wiring, it behaves exactly like the factory light — on with the door open, off when closed, nothing to charge. The catch: your Tesla must actually have the factory puddle lights fitted, and you should confirm your model year against the seller’s fitment list first.

4. LOWEEY Audi Door Logo Projectors, 4-Pack — Best Value for Audi

Specs:
– 4 projectors per pack — all four doors covered
– Dual-plug connectors for both Audi plug styles
– Fits A1–A8, Q3, Q5, Q7, Q8, R8, TT, A4L, A6L, e-tron (check years)
– “No Fade 4K-HD” film for a sharper, longer-lasting logo
– Model Projector-000; plug-in replacement, no wiring work

Most plug-in packs cover the front doors and leave the rears mismatched; this four-pack does the whole car in one purchase, the way the factory option would have looked. The dual-plug design is the other practical touch — Audi used more than one connector style across that model list, and having both plugs in the box saves a return. Match your model and year against the compatibility list, especially around facelift years.

5. uunonaha Non-Fading Door Logo Lights — Best Plug-In for Subaru

Specs:
– 2 projectors per pack, plug-in factory-light replacement
– Fits Forester SJ (2013–2017) and SK (2018–present)
– 12-volt operation, 5-watt LED output
– ABS and aluminum alloy housing for heat handling
– Install tool and manual included; needs an existing door light

Subaru’s door courtesy lights are a common projector swap, and this pair is built for exactly that job, with fitment stated by generation rather than a vague “fits Forester.” The aluminum housing is a genuine plus, because LED heat is what cooks the logo film in cheaper all-plastic units — better heat shedding is part of why this one can credibly claim a non-fading design. Installation is three steps: pry out the original light, plug in the projector, push it home. One requirement bears repeating: your Forester must already have door lights to power it.

Usage and Safety Notes

Projector lights are a parked-car accessory. They only operate with the door open, and their pool of light is small and decorative — do not count on it to reveal a curb, a pothole, or black ice the way a phone flashlight would.

For stick-on installs, preparation decides whether the unit is still attached in August. Wipe the mounting area with alcohol, let it dry, warm the panel and pad in cold weather, and press firmly for a full minute. Then set the magnet gap first: hold the unit in place, open and close the door, and confirm the light triggers and shuts off reliably — a sensor stuck on flattens batteries in days.

For plug-in installs, never force a connector. If the new unit does not light, check that the plug is fully seated and oriented correctly before assuming the part is faulty. And keep expectations honest: projection distance is fixed by door height, so lifted trucks throw a bigger, dimmer logo than low sedans, and no film slide survives years of heat and sun unfaded.

FAQ

Will a plug-in projector fit my car if it is not listed?
Almost certainly not. Housing shape and connector are specific to each maker’s door light, so a unit built for one brand will not clip into another. If your model and year are not on the seller’s list, choose a wireless stick-on model instead.

My car has no door light at all. Can I still add a projector?
Yes — that is exactly what the wireless stick-on type is for. It carries its own battery and sensor, so it needs nothing from the car except a flat surface on the door’s inside bottom edge and a sill spot for the magnet.

Why did my logo fade after a few months?
The image sits on a small film slide close to a hot LED, and heat plus UV slowly bleaches it. Better “no fade” films and aluminum housings slow this down but cannot stop it. Kits with spare or interchangeable slides make the fix cheap.

Do wireless door lights drain their batteries while the car is parked?
They should not — the magnet sensor keeps them off whenever the door is closed. If yours die quickly, the magnet is usually misaligned or the gap too wide, so the unit thinks the door is open. Realign it directly under the sensor.

Are door logo projectors legal?
They shine on the ground only while the door is open and the car is stationary, so they are broadly unproblematic. They are not driving lights and should never be wired to stay on while moving.

Conclusion

The right projector light is decided by your door, not by the prettiest listing photo. If your car already has factory puddle lights, a plug-in model matched to your make — LOWEEY for Tesla or Audi, uunonaha for Subaru — gives you factory behavior with zero battery chores. If your doors have no lights to replace, go wireless: the rechargeable LOWEEY pair is the practical default, the DoYoMo Highland Cow the fun one. Either way, treat the film slide as a wear item, and spend five extra minutes on sensor alignment or connector fitment.

A
Autozane Editorial Team
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Car Door Logo Projector Lights for a…Check price on Amazon

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free
Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account

As an Amazon Associate we earn from qualifying purchases.