Key takeaways
- KSP Performance 1-inch 6x5.5 wheel spacers for Tacoma and 4Runner reviewed: forged build, 108 mm bore, M12x1.5 studs, fitment and install notes.
A one-inch wheel spacer is the mildest stance upgrade you can bolt onto a Toyota truck, and this KSP Performance set is built for exactly that job. Each spacer moves the wheel 25 mm outward, which widens the track, gives larger tires a little more breathing room from suspension parts, and keeps the factory 6×5.5 bolt pattern on both sides, so it works with stock and aftermarket wheels alike.
The trade-off is in the details. KSP lists this model with a 108 mm center bore and sells it openly as a lug-centric design rather than a hub-centric one, so correct installation and torque discipline matter more here than they do on a bore-matched spacer. This review walks through the published specifications, the full fitment list, and the installation notes KSP ships with the product, so you can decide whether that trade-off suits your truck.
As an Amazon Associate, we earn from qualifying purchases.
Quick Answer
The KSP Performance 1-inch 6×5.5 wheel spacers push each wheel out 25 mm for a wider stance and extra tire clearance on 6-lug Toyota trucks. They are forged, black anodized, and use M12x1.5 studs with grade 10.9 lug nuts. The 108 mm bore is lug-centric, not hub-centric, so careful torquing matters.
Key Specs
| Feature | Detail |
|---|---|
| Brand | KSP Performance |
| Model number | 6009K |
| Manufacturer part number | 100-6550550-1081215K-009BK |
| Thickness | 1 inch (25 mm) per spacer |
| Vehicle bolt pattern | 6×5.5 inch (6×139.7 mm) |
| Wheel bolt pattern | 6×5.5 inch (6×139.7 mm) |
| Thread pitch | M12x1.5 |
| Center bore | 108 mm |
| Centering design | Lug-centric; the listing states this model is not hubcentric |
| Construction | Forged 6061-T6 aluminum, CNC machined (manufacturer material specification) |
| Finish | Black anodized surface |
| Lug hardware | Grade 10.9 lug nuts (per listing special features) |
| Headline fitment | Toyota Tacoma 2005-2023 (6-lug only) and 4Runner 1989-2023; also Tundra 2000-2006, FJ Cruiser 2007-2013, Sequoia 2001-2007, Land Cruiser 1988-1997 and more per the listing |
| Package weight | 12.1 pounds |
| Set quantity | not stated |
| Recommended torque value | not stated (the listing directs installers to the vehicle manufacturer specification) |
| Warranty | not stated |
Who It’s For
This set suits Tacoma and 4Runner owners who want a modest, reversible stance change without replacing wheels. A 25 mm push per side is enough to flush up factory wheels with the fender line, create clearance between a wider tire and the upper control arm, and keep steering feel close to stock. Because the bolt pattern stays 6×5.5 on both faces, the spacers work with factory wheels and most aftermarket 6-lug wheels, and the forged, anodized construction is aimed at trucks that see dirt, weather, and road salt rather than show duty only.
Owners of the other listed applications, including older Tundra, FJ Cruiser, Sequoia, and several GM, Isuzu, and Mitsubishi 6-lug models, can also use this set, provided the studs are M12x1.5 and the wheel center bore works with a 108 mm spacer bore.
Who should skip it: anyone who specifically wants a hub-centric fit should look at hub-centric designs instead, because this bore centers on the lug nuts rather than the hub flange. Owners of 2024 and newer Tacomas should also skip it, since that generation uses different stud and bore dimensions. Five-lug Tacoma owners have no use for it at all. Finally, if you are not willing to re-torque lug nuts on the schedule KSP publishes, or you plan to run very wide tires with minimal fender clearance, a spacer of any kind is the wrong purchase.
How It Compares
Against hub-centric spacers in general, this KSP set gives up the bore-matched seat that lets the hub carry the wheel load. Hub-centric designs are the more forgiving option for drivers who rarely check torque, while a lug-centric spacer like this one depends on even, correct lug nut tightening to stay centered. In exchange, the oversized 108 mm bore fits a wider range of vehicles and wheels, which is why this single model covers so many applications.
Against thicker spacers, the one-inch size is the conservative choice. Spacers of 1.5 or 2 inches push the wheel much further out, which increases the chance of tire-to-fender contact and adds leverage on wheel bearings. The 25 mm thickness here is usually enough for clearance and stance corrections without forcing fender work. Against cast spacers, the forged construction KSP specifies is the stronger manufacturing route, since forging aligns the aluminum grain instead of pouring it. And against slip-on spacers that reuse the factory studs, this bolt-on design carries its own studs, so thread engagement does not depend on how much factory stud length remains.
FAQ
Are these KSP spacers hub-centric?
No. The listing states plainly that this model is not hubcentric. The center bore measures 108 mm, which is larger than the hub flange on the Toyotas it fits, so the wheel is centered by the lug nuts as they are tightened in sequence. That makes even torque, applied in a star pattern, especially important during installation.
Which Tacoma and 4Runner years does this set fit?
Per the listing, it fits the Toyota 4Runner from 1989 through 2023 and the Tacoma from 2005 through 2023, for 6-lug vehicles only. The same listing also covers the 2000-2006 Tundra, 2007-2013 FJ Cruiser, 2001-2007 Sequoia, 1988-1997 Land Cruiser, and a range of other 6×5.5 applications. Always confirm your studs are M12x1.5 before ordering.
What installation rules does KSP publish for these spacers?
KSP advises measuring first to confirm the tire will not contact the fender after the wheel moves outward, torquing the lug nuts to the vehicle manufacturer specification, and avoiding an impact wrench. The brand also instructs owners to re-torque every lug nut after 50 to 100 miles of driving, then again every 2,000 to 3,000 miles, and recommends that installation be performed by a trained professional.
Will a 1-inch spacer make my tires rub?
It can, depending on tire size. Moving the wheel out 25 mm changes where the tire sits in the wheel well through the steering arc, so a tire that cleared at stock offset may touch a fender liner or mud flap after spacing. KSP’s own guidance is to measure the available space before buying, which is the reliable way to answer this for your exact tire and lift combination.
Final Verdict
The KSP Performance 1-inch 6×5.5 wheel spacers are a straightforward, honestly specified option for 6-lug Toyota trucks. The forged and anodized build, grade 10.9 hardware, and broad published fitment list are the strengths; the lug-centric 108 mm bore is the compromise, and KSP does not hide it. Buy this set if you want a mild stance and clearance correction and you are disciplined about torque checks. Choose a hub-centric design instead if you want the hub, not the lug nuts, to center your wheels.
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeA free business account with business pricing and bulk-buying tools for work, shop or home office.
Create a business accountAs an Amazon Associate we earn from qualifying purchases.