Our Top Picks
A deep center console swallows keys, coins, cables and sunglasses into one tangled pile. A molded organizer tray fixes that by adding a shallow, divided layer at the top of the armrest box, keeping daily items visible while the space below stays free for larger gear. Fit is everything with these trays, so each pick below names the exact models it suits.
As an Amazon Associate, we earn from qualifying purchases.
Quick answer
Console trays are vehicle-specific, so the best pick is the one molded for your car: AJT Design for late Toyota Tundra and Sequoia trucks, BestEvMod for Rivian R1T and R1S, LUNQIN for the Toyota bZ4X and Subaru Solterra, and XHW for the Toyota Sienna. Drivers with bench seats or an older vehicle should choose the universal Automiim foldable console instead.
AJT Design Center Console Organizer Tray Liner
AJT Design takes a liner approach for the 2022 and newer Toyota Tundra in Platinum, 1794, TRD Pro and Capstone trims, plus the 2023 and newer Sequoia. Instead of a single tray, the set includes upper and lower liners that drop into both console compartments, each with a grippy, anti-slip surface that stops coins, keys and phones sliding and rattling on rough roads. The material is a PP and E/P blend that feels close to factory trim, so the liners look like original equipment rather than an add-on, and they lift out in seconds for cleaning crumbs and dust. Because they line the compartments rather than dividing them into small cells, they suit drivers who want order and quiet more than lots of tiny slots. The important catch is trim coverage: the set does not fit Tundra SR, SR5 or Limited models, so check your trim before ordering. There is also no coin holder or dedicated phone slot shaping. For owners of the higher Tundra trims and the Sequoia who find the bare console bins noisy and messy, this is the most integrated solution in this roundup.
BestEvMod Center Console Organizer Tray for Rivian
The Rivian R1T and R1S have a tall, open center console that begs for a tray, and this BestEvMod organizer is molded to drop straight into it. It is made from ABS with a PVC trim finish, in versions with or without a coin section, and it creates a tidy top layer for sunglasses, keys, cards and a phone while the deep well underneath remains available for larger items. The fit follows the console walls closely, so the tray stays put instead of sliding, and it can be lifted out by its edges when you need the full depth below. The yellow-trim variant adds a visible accent that some owners like for finding the tray edges at night, while plainer versions blend in. As with every molded tray here, it fits only the Rivian trucks, 2022 through 2026 model years, and owners of other vehicles should look elsewhere in this list. For R1T and R1S drivers tired of fishing small items out of a deep, dark console, this is the natural first upgrade and one of the simplest to install.
LUNQIN Car Center Console Organizer Tray for bZ4X and Solterra
The Toyota bZ4X and its twin, the Subaru Solterra, share an unusual floating console design, and this LUNQIN tray is molded from the original car’s dimensions to sit in the front center console area. It is cast from TPE silicone material, which gives it a softer, quieter feel than hard plastic trays: items rest without rattling, and the tray itself flexes slightly for easy removal when you want to clean it or reach underneath. The divided layout gives daily items like a wallet, cards, phone and tissues a defined place instead of letting them drift around the open console. Because it is a one-to-one molded piece, it integrates with the console shape without gaps or noise. Coverage is narrow by design, fitting the bZ4X and Solterra from 2023 through 2026, and it will not suit other Toyotas despite the shared brand. The soft material also means very heavy items are better stored below. For owners of these two EVs, it turns an awkward open space into usable, organized storage with no tools and no modification. It also lifts straight out for vacuuming the console floor beneath it.
XHW Center Console Organizer with Cup Holder for Toyota Sienna
The fourth-generation Toyota Sienna, from 2021 through 2025, has a wide bridge-style console, and this XHW organizer is shaped for the lower center console area, adding a storage tray with an integrated cup holder. That cup holder is the feature that sets it apart in this group: front passengers gain an extra, stable place for a drink or bottle within easy reach, while the surrounding tray corrals phones, wipes, snacks and the small clutter that family driving generates. The tray is made from TPE material with a finish intended to sit comfortably alongside the Sienna’s interior trim, and it installs by simply setting it in place. Minivan consoles collect more varied cargo than most, so the open, easy-clean layout makes sense; there are fewer tiny dividers than in some trays, which means small items share space rather than each getting a cell. Fit is limited to the 2021 to 2025 Sienna. For families whose console has become a rolling junk drawer, this tray adds both order and a genuinely useful extra cup holder. It also wipes clean quickly after the inevitable drink spill.
Automiim Foldable Bench Seat Center Console
Not every vehicle has a console that trays are molded for, and that is where this universal Automiim unit earns its place. It is a foldable bench seat console with two large cup holders and a generous storage compartment, designed to sit on a bench seat, a wide armrest area or even the floor of a van or truck cab. That makes it useful in older pickups, classic cars, work vans and the rear bench of family SUVs, where it gives passengers their own cup holders and a lidded place for devices, snacks and cables. The foldable design lets it flatten for storage when the full seat is needed, and because nothing is molded, it moves between vehicles freely. The compromises are stability and looks: a universal box can shift on a seat under hard braking if it is not positioned carefully, and it will never look as integrated as a custom tray. Drivers should place it on a flat, secure spot and avoid relying on it for heavy bottles in tall holders. For bench-seat vehicles, it is the only realistic option here.
How to choose
Measure and identify your console first. Molded trays only fit the exact model, years and sometimes trims listed, so confirm all three before buying; a tray that almost fits will rattle or block the lid. Next, decide what you want the tray to do: liners quiet and protect the console, divided trays sort small items, and trays with cup holders add function. Consider material as well. Hard ABS holds its shape and wipes clean, while softer TPE is quieter and kinder to items but flexes under weight. Finally, think about access to the space below: a good tray lifts out easily or leaves the lower well reachable, so you do not lose the deep storage that made the console useful in the first place.
Who should skip
Skip a molded tray if your vehicle is not named in the fitment list; close-enough rarely works with one-to-one molded parts. Drivers who mostly store one or two large items in the console will lose more than they gain from a shallow tray. If your console already has a factory tray that you like, an aftermarket liner adds little. And owners planning to sell the car soon may prefer the universal console, which can move to the next vehicle instead of staying behind.
Frequently asked questions
Will a console tray stop my armrest lid from closing?
A correctly fitted tray sits below the lid line and the lid closes normally. Problems come from trays bought for the wrong model, year or trim, or from overfilling the tray so items sit proud of its walls. Confirm the fitment list and keep tall items in the lower well.
Are console organizers worth it for a small console?
They help most in deep consoles where small items get lost. In a shallow console, a tray adds little because everything is already reachable, and it may reduce the usable height. Measure your console depth first; if it is only a few inches, a simple liner is the better buy.
How do I clean a console organizer tray?
Most trays and liners lift out in seconds and can be shaken out, wiped with a damp cloth or rinsed and dried. TPE and ABS both tolerate mild interior cleaners. Cleaning the tray outside the car also gives you a chance to vacuum the console well underneath, where crumbs collect.
Can I use a tray from a similar model of car?
It is risky. Consoles change between model years, trims and facelifts, and a tray molded for a sibling model often leaves gaps or blocks the lid. Use the exact year and trim fitment the maker lists, or choose a universal organizer instead of gambling on a near match.
Final verdict
The right console organizer is simply the one molded for your vehicle: AJT Design for the big Toyota trucks, BestEvMod for Rivian owners, LUNQIN for the bZ4X and Solterra, and XHW for Sienna families who want the extra cup holder. Everyone else, especially bench-seat drivers, is better served by the flexible, portable Automiim console.
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeA free business account with business pricing and bulk-buying tools for work, shop or home office.
Create a business accountAs an Amazon Associate we earn from qualifying purchases.




